Used filling monoblock MBF 2001 Manufacturer: MBF Model: 16 20 3 Year: 2001 Speed: 3500 bph Containers: Glass Formats: 0.75 L Product: Still wine Rinser Number of grippers: 16 Number of treatments: Single Filler Number of valves: 20 Filling type: Gravity/light vacuum Nozzle type: Mobile Corker Types of cork: Straight cork Number of heads: 3 Current status: In production Safety guards: Yes Manual: Yes Rotation direction: Clockwise Used filling monoblock MBF 2001 Filling monoblock composed of: 1) Rinser with 16 grippers for a single treatment , carousel with grippers with electrically variable height, 2) Filler with 20 taps with light vacuum in the bell, bell with electrically variable height, mechanical spring-loaded bottle lifting pistons, level adjustment. Taps via Central Rack 3) Corker 3 Head Flush Cork With Vacuum And Gas Before Closing Electrically Variable Height Head 4) Level control system with logics and controls Base frame in painted iron and then stainless steel fairing Safety guards on the entire machine perimeter Bottle entry from the left Production approximately 3,500 bottles per hour Year 2001 CE marked Used until December 2021 No. 3 bottle equipment Specifications – used filling monoblock MBF MACHINE BASE – SYNCHROFILL Automatic light vacuum group, built by MBF model SYNCHROFILL 960.16UFT1 / 960.20LV / 360.3R for rinsing, filling and corking wine. The machine is composed of: Rinser No. 16 fixed nozzle clamps Filler No. 20 taps Capping machine No. 3 heads for caps Suitable for glass bottles with the following dimensions: ø max: 120 mm. ø min: 52 mm. h max: 360 mm. h min: 190 mm. Product: wine Production: 3,500 b/h bottle capacity: 0.75 l Straws: ø 15 mm. Basic machine description: Machine support frame, welded steel structure, sandblasted and protected by several coats of epoxy paint, entirely covered in stainless steel. The mechanical parts that implement the rotation of the machine are housed inside the frame. Largely sized electric motor, controlled by electronic frequency converter (inverter). Manual lubrication with grease nipples. The grease nipples of the static parts are collected on an easily accessible block. Stainless steel electrical panel, positioned on the side of the machine; It is complete with: Ø Electromechanics and control buttons Ø Analogue pressure gauges Transparent safety guards with stainless steel frames integrated into the base structure. Each guard is equipped with a safety microswitch RINSING TURRET – RINSMATIC – FIXED NOZZLE for one treatment General features: Structure of grippers and various parts entirely in stainless steel. Rotating spray control manifold in AISI 304 stainless steel and food-grade plastic materials. Annular drain tank for rinse water. Rinsing fluid shut-off solenoid valve. Rinsing fluid pressure regulator and pressure switch. Required production: 3500 BPH Bottle size: 0.75 l Treatment times: 2 Seconds of spraying with sterile water or sterilising solution 7.5 Seconds of dripping 9.5 Seconds of total treatment. TECHNICAL DATA Nozzle type Fixed Number of grippers