NEW | Still under manufacturer's warranty | Original packaging | Immediate availability Following a long-term corporate strategy review, an industrial steam turbogenerator Howden – model KK&K TWIN CA46 is available for immediate delivery. The unit is new, never installed nor commissioned, and supplied complete according to the original Howden offer. The machine has already been manufactured, OEM-tested, and stored indoors, allowing the elimination of standard manufacturing lead times, which are typically associated with this type of equipment. Scope of supply includes: Steam turbine on skid with integrated gearbox Synchronous generator supplied separately ⚙️ Technical configuration Type TWIN CA46 steam turbine Two separate turbine casings (Steam Part A + Steam Part B) Integrated three-shaft gearbox (two pinions + central gear) Controlled steam extraction between HP and LP sections (included) Design conditions Part A – HP Inlet pressure: 16 bar(a) Inlet temperature: 400 °C Exhaust pressure: 2.5 bar(a) Steam flow rate: 10,000 kg/h Part B – LP Inlet pressure: 2.4 bar(a) Inlet temperature: 223 °C Exhaust pressure: 0.3 bar(a) (condensing / vacuum) Steam flow rate: 5,000 – 10,000 kg/h ⚡ Electrical performance Gearbox output speed: 1,500 rpm Mechanical power at coupling: up to 1,658 kW Electrical power at terminals: up to 1,595 kW 🔌 Electrical generator (supplied separately) Three-phase synchronous generator Rated power: 1,994 kVA Voltage: 6 kV Frequency: 50 Hz Power factor: 0.8 Rated speed: 1,500 rpm Efficiency: up to 96.19% Protection degree: IP44 R Cooling system: IC31 – air-cooled, self-ventilated Brushless execution with integrated excitation Designed for parallel operation with the grid 🛢️ Included auxiliaries Integrated oil system in the base frame (lubrication and control) Main mechanical oil pump Auxiliary electric oil pump Water-cooled oil heat exchanger Duplex oil filter Skid base with integrated oil tank Flexible coupling with safety guard 🎛️ Control, protection and panels SC901 electronic speed governor Live steam pressure control Extraction steam pressure control Independent overspeed protection device Operating modes: Grid parallel Island mode Local skid-mounted control panel Separate control and protection panel Siemens SIPROTEC 5 PROFINET interface ENC-RfG turbogenerator simulation model included Automatic drain valves (supplied loose) 🔧 Typical applications Industrial cogeneration plants Energy recovery from process steam Biomass and waste-to-energy plants Combined production of electric power and process steam ⭐ Key advantages New machine, never installed nor commissioned Immediate availability → elimination of manufacturing lead times (approx. 2–3 years) Complete OEM solution, supplied according to original Howden scope High operational flexibility (grid parallel / island mode, steam extraction) Ideal for projects with tight schedules or revamping of existing plants 📦 Status and conditions Condition: NEW Year of manufacture: end of 2024 Never installed – never started Stored in indoor environment Complete Howden technical documentation available Installation and commissioning on site available directly from the manufacturer 💰 PRICE: Upon request Further technical information and documentation available upon request.