==>GLASS PAINTING LOT (N ° 8 MACHINES), AND MORE: CUTTING, MILLING, DRILLING, GRINDING, CHAMFERING, PARTING, SANDBLASTING, WASTE WATER CLEANING==

GLASS PAINTING LOT + various, N°8 machines for processing flat glass, including: Cutting, milling, drilling, grinding, chamfering, breakout, sandblasting, painting, etc., up to the cleaning of the processing water, as per the list below:

1 Elmag Painting Line / various Automatic painting line consisting of loading, washing, spray painting, curtain coater, roller and passivation oven
1.1 Elmag spray booth Painting booth with 4-gun reciprocator. Overspray collection tanks with deaeration changes + paint collection system from paper-type transport (glasses walk on a sheet of paper)
1.2 TFT… TOMANIN Curtain coating with collection tank of approximately 15 kg
1.3 TFT/3s TOMANIN Roller coater, Useful width: 1300 mm Speed ​​8-25 m/min + 2 spare rollers
1.4 Elmag drying oven Electric drying oven with glass deposit in trays with useful length 3000 mm
1.5 Commercial loading station loading station + osmosis water washing machine
1.6 Commercial unloading station piece unloading station + heating with IR lamps
2 454/A Q1 Vacuum Filter srl Rotating Filter System in AISI 304 with EN60204-1 scraping blade for cleaning waste water from production processes. The machine works with diatomaceous earth.
3 commercial VBA Hand Painting Booth with dry plenum consisting of a mix kitchen, a pressurized painting area with UHR control and a pressurized and heated passivation area (dust-free). The system is equipped with 2 AHUs, one for the painting area and the other for the passivation area, both connected to the pressurized hot water circuit. The AHUs are provided with an atmospheric outlet.
4 Master Edge 2300 OT INTERMAC 3-axis machining center, worktable for milling, drilling and grinding sheets. Worktable dim. 2300 X 3000
5 Master Edge 2300 OT INTERMAC 3-axis machining center, worktable for milling, drilling and grinding sheets. Worktable dim. 2300 X 3000
6 Bystronic / Bottero Cutting Bench Cutting bench complete with tilting table, cutting table and breakout table
6.1 Bottero Tilting Table Bottero tilting table for loading the sheet from the stand
6.2 Bystronic Cutting Table Bystronic cutting table assisted by microprocessor
6.3 Bottero breakout table
9 MAX 50 CN-P Bavelloni Straight line bevelling machines 10 spindles, Bevel angle: 3-45°, Glass thickness: 3-25 mm
10 Sahara 1500CN Fratelli Pezza CNC sandblasting machine

The lot will be sold as a single solution, at the budget price of Assoluto Realizzo A € 169,000
PS: assistance with loading is expected (no dismantling).