GUGLIELMI ATTS B01H600M Cod. 14-22 automatic belt cross-cutting machine
AUTOMATIC SINGLE DISC STRAIGHT CROSSING MACHINE FOR MARBLE GRANITE, - has a solid structure designed to support and handle heavy slabs; - has a support surface made of a thick motorized rubber belt, with the possibility of setting the automatic feed of the material, at the height chosen by the operator on the keyboard and indicating with chalk, it uses an inverter that manages the feed of the spindle carriage with slowing down of the cutting speed in the terminal phase to eliminate breakages of the material and is complete with rapid return of the cutting group, it can work both automatically and with a manual cycle allowing the operator to make the best choice depending on the material and the production to be obtained; it is equipped with an alphanumeric keyboard for setting and choosing the cutting cycles; – offers the operator the advantage of making cuts to size thanks to the retractable mobile stops with which the bench is
equipped
. – support table made of a thick motorized rubber belt with the possibility of automatically setting material feed to the dimension selected by the machine operator on the keyboard; employ an inverter that controls spindle carriage feed with speed slow down during terminal phases to reduce workpiece breakage and with fast-unit return speed to reduce processing times; – both manual and automatic cycles: the machine operator selects the best cycle depending on the material being processed and the products to be made; The machine operator sets the depth of each pass depending on the type of material being processed; – controlled by an electronic computer that monitors and manages processing phases and can different cycles for maximum flexibility and greater reliability; – equipped with an alphanumerical keyboard for setting and selecting cut cycles; work with a belt-drive motor/spindle system with the possibility of changing RPM according to the material to be cut; Mod. GUGLIELMI ATTS B01H600M Cod. 14-22