Machine Overview: ACMI RASAR D 200 S Depalletizer (2007), a conventional automatic layer depalletizer with a dual translating gripper system. The first gripper acts as a centering device to stabilize the underlying layer; the second gripper clamps and transfers the entire layer onto a polyethylene intermediate plate and then onto the discharge conveyor. Mechanical grippers handle the pads/interlayer pads. A column-mounted layer pad/top frame remover with its own dedicated loader is included. Complete with perimeter guarding, access doors with interlocks, and light curtains. Supplied with a stacker/store for empty pallets. English: Key Technical Data Make/Model: ACMI RASAR D 200 S Year: 2007 Operating Principle: Top layer transfer with top infeed via twin grippers with PE intermediate platform Handling Type: Conventional (non-robotic) Operating Mode: Automatic Rated Power: Up to 20,000 bph (depending on format and layout) Containers: Glass and PET bottles, jars, cans, flasks, jars, etc. (subject to formatting) Uncorking System: Column/Top Frame Layer Extractor with Loader (Mechanical Interlayer Pickup) Pallet Handling: Empty Pallet Stacker/Magazine included Product Feed: From Top Automation & Control Control panel with PLC-based logic Operator keypad with alarm/event viewer for diagnostics Control Voltages: Auxiliary 24 VDC; 24/230 VAC instrumentation Electrical protection: IP54 cabinet and motors Standard I/O for line signals and safety interlocks (details to be aligned during integration) Line integration High-level offloading to downstream conveyors via PE intermediate plate and transfer grippers Interfaces for pallet infeed, empty pallet outfeed/stacking, layer pad storage and top frame/pad removal Suitable for integration into bottling and canning lines handling a wide range of container sizes Layout design available; Final footprint and interfaces to be confirmed during project engineering Status and Maintenance Condition: In production Routine preventative maintenance is recommended: clamp pads, belt/chain tensions, lubrication points, sensor alignment, safety device testing Spare parts and changeover components to be verified against currently installed set Performance and Versatility Up to 20,000 bph depending on container, layer pattern, slipsheet type and downstream conditions Handles bottles (glass/PET), jars, cans and similar rigid containers Double clamp centering ensures layer stability while protecting the layer underneath Mechanical gripping between layers allows reliable separation of layers and slipsheets/caps Site Requirements Mains power: 400 V ±5%, 50 Hz ±1% Distribution: 3P + N + PE (separate neutral and earth) Auxiliary voltages: 24 VDC; instrumentation 24/230 VAC Ambient conditions: 5–40 °C; Relative humidity 30–80% non-condensing; maximum altitude 1000 m Area classification: No explosive or harmful gases Safety and compliance Perimeter protection with access doors equipped with safety interlocks Light curtains to prevent access during movement Electrical and motor protection rating: IP54