The used Tria brand mill with a 500 mm opening is a high-quality machine designed for crushing and grinding various types of materials. This model is known for its robustness and reliability, making it a popular choice for industrial and artisanal applications. Let's explore in detail its technical features, operation, and the benefits of purchasing a used mill.

The Tria mill with 500 mm mouth is made up of several essential components that define its performance:

• Machine Body : Made of high-strength steel, the mill body ensures strength and durability. The structure is designed to withstand mechanical stress and vibration during use.
• Feed Nozzle : The 500 mm feed nozzle is designed to accommodate and process large materials. Feed nozzle size directly affects feed capacity and the size of material that can be processed.
• Rotor and Blades : The rotor is equipped with high-quality blades that shred and reduce materials into smaller pieces. The blades are adjustable and can be replaced when worn.
• Grinding Screen : The screen, located inside the mill, determines the final size of the ground material. It can be interchanged to adapt to different grinding needs.
• Motor : The mill is equipped with a powerful motor, usually three-phase, which provides the power needed for grinding operations. Power can vary depending on the model, typically between 5 and 15 kW.

• Feed Capacity : The 500mm mouth allows for the processing of significantly sized materials, increasing the mill's productivity.
• Rotation Speed : The rotor speed is adjustable to accommodate different types of materials and grinding needs. Typical rotation speeds range between 1000 and 3000 rpm.
• Dimensions : The overall dimensions of the mill can vary, but typically include a height of approximately 150-200 cm, a width of 100-150 cm, and a depth of 80-120 cm.
• Weight : The weight of the Tria mill with 500 mouth is generally between 500 and 1000 kg, ensuring good stability during use.

To use the Tria mill with a 500 mm mouth, follow these steps:

1. Preparation : Make sure the mill is properly installed and connected to the power source. Verify that all parts are in good condition and ready for use.
2. Material Loading : Feed the material through the 500 mm mouth. The size of the material must be compatible with the mouth capacity and the desired shredding type.
3. Operations : Start the motor and adjust the rotor rotation speed if necessary. Monitor the shredding process to ensure the material is ground to the desired specifications.
4. Unloading Material : Collect the shredded material through the designated outlet and verify that it has been reduced to the required size.

The Tria mill with a 500 mm mouth can be equipped with various accessories to improve its functionality:

• Interchangeable Grids : Different grids to achieve different grinding sizes.
• Additional Knives : To improve shredding efficiency or to handle specific materials.
• Extraction System : To remove dust and chips during the grinding process.

To optimize the use of the Tria mill, consider the following variables:

• Rotation Speed : Rotor speed can affect shredding efficiency. Too high a speed can cause premature wear of the blades, while too low a speed can reduce productivity.
• Material Size : Make sure the material you feed is compatible with the mill's mouth size and specifications to avoid blockages or inefficiencies.

The Tria mill with 500 mm mouth is suitable for:

• Plastics : For the reduction and recycling of various plastics.
• Light Metals : Some models can handle light metals or alloys.
• Other Materials : Wood, organic waste and composite materials, depending on the mill configuration and specifications.

To keep your Tria mill with a 500 mm mouth in top condition:

• Lubrication : Regularly lubricate moving components, such as the rotor and bearings.
• Cleaning : Remove dust and debris from the mill after each use to prevent buildup and malfunction.
• Inspection : Periodically check the condition of the knives, grids and motor, and replace any worn or damaged parts.

When purchasing a used Tria 500 mouth mill, consider:

• Overall Condition : Check the body, mouth and knives for signs of wear or damage.
• Operation : Make sure the motor and shredding system are working properly.
• Accessories : Check that accessories and grills are in good condition and included.

The Tria mill with a 500 mm mouth is ideal for:

• Plastic Industry : For the recycling and reduction of plastic.
• Paper and Cardboard Industry : For shredding paper and cardboard materials.
• Agricultural Sector : For the grinding of organic materials and agricultural waste.

Buying a used Tria mill with a 500 mm mouth can be advantageous for:

• Reduced Cost : The price of used is generally lower than new.
• Reliability : Models like the Tria are designed to last and can deliver excellent performance even after years of use.
• Parts Availability : Established models often have good parts and service support.

In short, the used Tria mill with a 500 mm opening is a robust and versatile machine, perfect for those seeking efficiency and reliability. With proper maintenance and a thorough assessment, it can be an excellent choice for a variety of industrial applications.