Used filling monoblock MBF 2001

Manufacturer:
MBF
Model:
16 20 3
Year:
2001
Speed:
3500 bph
Containers:
Glass
Formats:
0.75 L
Product:


Still
wine Rinser Number of grippers:
16
Number of treatments:
Single
Filler
Number of valves:
20
Filling type:
Gravity/light vacuum
type:
Mobile
Corker
Types of cork:
Straight cork
Number of heads:
3
Current status:
In production
Safety guards:
Yes
Manual:
Yes
Rotation direction:


Clockwise Used filling monoblock MBF 2001
monoblock composed of:

1) Rinser with 16 grippers for a single treatment

, carousel with grippers with electrically variable height,

2) Filler with 20 taps with light vacuum in the bell,

bell with electrically variable height,

mechanical spring-loaded bottle lifting pistons,

level adjustment. Taps via Central Rack

3) Corker 3 Head Flush Cork

With Vacuum And Gas Before Closing

Electrically Variable Height Head

4) Level control system with logics and controls

Base frame in painted iron and then stainless steel fairing

Safety guards on the entire machine perimeter

Bottle entry from the left

Production approximately 3,500 bottles per hour

Year 2001 CE marked

Used until December 2021

No. 3 bottle equipment

Specifications – used filling monoblock MBF
MACHINE BASE – SYNCHROFILL Automatic light vacuum group, built by MBF model SYNCHROFILL 960.16UFT1 / 960.20LV / 360.3R for rinsing, filling and corking wine. The machine is composed of:

Rinser No. 16 fixed nozzle clamps Filler No. 20 taps Capping machine No. 3 heads for caps

Suitable for glass bottles with the following dimensions: ø max: 120 mm.

ø min: 52 mm. h max: 360 mm. h min: 190 mm. Product: wine

Production: 3,500 b/h bottle capacity: 0.75 l Straws: ø 15 mm.

Basic machine description:
Machine support frame, welded steel structure, sandblasted and protected by several coats of epoxy paint, entirely covered in stainless steel. The mechanical parts that implement the rotation of the machine are housed inside the frame.

Largely sized electric motor, controlled by electronic frequency converter (inverter).

Manual lubrication with grease nipples. The grease nipples of the static parts are collected on an easily accessible block.

Stainless steel electrical panel, positioned on the side of the machine; It is complete with:

Ø Electromechanics and control buttons

Ø Analogue pressure gauges

Transparent safety guards with stainless steel frames integrated into the base structure.

Each guard is equipped with a safety microswitch

RINSING TURRET – RINSMATIC
– FIXED NOZZLE for one treatment

General features:

Structure of grippers and various parts entirely in stainless steel.

Rotating spray control manifold in AISI 304 stainless steel and food-grade plastic materials.

Annular drain tank for rinse water. Rinsing fluid shut-off solenoid valve. Rinsing fluid pressure regulator and pressure switch.

Required production: 3500 BPH

Bottle size:

0.75 l

Treatment times:

2 Seconds of spraying with sterile water or sterilising solution

7.5 Seconds of dripping

9.5 Seconds of total treatment.

TECHNICAL DATA

Nozzle type Fixed

Number of grippers