Ultrasonic Mold Cleaning Tank 1300 x 600 h 1300mm Machine built in 2018, only used for a few years, currently in good condition, designed for the descaling and cleaning of molds for plastic processing, but clearly usable in various applications. Treatment cycle: - Timed washing in a water/caustic soda solution, temperature-controlled and activated by ultrasound. - Rinsing in water, with compressed air blown through a diffuser positioned at the bottom of the tank. - Rinsing in temperature-controlled oil water for mold protection, with compressed air blown. Washing tank: - Ultrasonic tank capacity, approximately 1350 liters. - Tank construction material: AISI 316, 20/10 thick stainless steel suitable for ultrasound, with special reinforcements. - Internal usable tank dimensions: 1300 x 600 x 1300 mm high. - Heating elements controlled by special thermoregulation instruments. - The elements are housed in a special niche to protect them from accidental impacts and at the same time leave the entire tank volume free. - Ultrasonic transducers will be flanged to the side walls, opposite each other to better engage the molds. - The dimensions of the 4 opposing flanges are approximately 800 x 500 cm, complete with generator. - The tank walls are soundproofed with sound-absorbing panels. - The level of the ultrasonic bath is controlled with a floating sensor. - Thermal insulation for the heating tanks. - Mold supports proportionate to the weight to be handled. - Heating power KW 24. - Ultrasonic power W 10,000/25mhz Rinse tanks: - Usable internal dimensions of the rinse tanks, 1300 X 600 X H1300mm - Rinse tank construction material, AISI 304 20/10 stainless steel. - Rinse water supply and compressed air supply, manually operated by the operator. - Platform in front of the tanks for the operator - Open weir discharge for overflow. - Raised front platform complete with railing, see drawing ELECTRIC HOIST The moulds are moved by means of an electric hoist with a capacity of 20 quintals which slides along a rail longitudinally to the tanks. - No. 01 Beam for hoist sliding. - No. 02 Portals for monorail support - No. 02 Brackets with clamps for monorail support - No. 01 Chain hoist with electric trolley 2000 kg - Hoist lifting speed 4 m/min. - Trolley translation speed 11 m/min. - Lifting motor power 1.5 Kw - Trolley translation motor power 0.5 Kw - Power supply voltage 400 V - 50 Hz - Auxiliary voltage 48 V - FEM class: lifting structures A 4 - Mechanisms M 4 - DIMENSIONS: 7450x2410H5132mm REFERENCE STANDARDS - The crane is built in accordance with the standards listed below - DPR 459 of 24/7/96 Regulation for the implementation of the Machinery Directive 89/992 EEC; and subsequent amendments. - CNR-UNI 10011 - FEM - CEI - CE Mark - Schematics and use and maintenance manual. This system is being sold as a whole at an all-inclusive price of €69,000, ready for sale in Northern Italy