Used "BAYKAL" APH 4105X120 Hydraulic Press Brake

Introduction

The BAYKAL APH 4105X120 is a used hydraulic press brake that represents an excellent choice for companies seeking reliability and precision in metalworking. BAYKAL , a brand renowned for its build quality, offers with this model a machine that, despite being used, retains all the features that make it competitive in the bending sector.

Appearance and Construction

Visually, the BAYKAL APH 4105X120 appears to be a robust and well-designed machine. Its steel structure is designed to withstand high mechanical loads and ensure a long lifespan. Here's a detailed overview of the machine:

• Effective bending length : 4100 mm
• Power : 120 tons
• Overall Dimensions : Not specified, but the machine weighs 11,500 kg.
• PRG 920 positioner : This device allows you to precisely adjust the position of the piece to be bent.
• Barrier Safety Photocells : Installed to ensure operator protection, preventing unauthorized access to the work area during the bending cycle.
• Manual Centering Table with Handwheel : Allows manual adjustment of the table position, using a handwheel to facilitate adjustments.
• Recess : 500 mm, which determines the distance available for the material to pass under the punch.

Components and Features

The BAYKAL APH 4105X120 is equipped with various components that contribute to its functionality:

• Motor : Powerful 11 ​​kW motor, which ensures adequate power for bending operations.
• Intermediates and Tools : The machine is supplied with new intermediates and tools, which ensure optimal performance and high quality bending.
• Axes : Equipped with 2 axes, which provide the ability to make precise adjustments and operations.

Usage Procedure

Using the BAYKAL APH 4105X120 is relatively simple and can be broken down into the following steps:

1. Material Preparation : Place the material on the camber table and make sure it is well aligned.
2. Adjusting the Board : Use the steering wheel to set the desired position of the board.
3. Setting the Positioner : Adjust the PRG 920 positioner to obtain the correct bending position.
4. Bending Execution : Start the bending cycle and monitor the process via the safety photocells.

Compatible Accessories

To optimize the use of the BAYKAL APH 4105X120 , the following accessories can be added:

• Specialty Tools : Tools designed for specific bending applications.
• Additional Support Systems : As side supports to handle longer or heavier workpieces.
• Security Expansion Modules : To increase the level of protection during use.

Formulas for Optimal Use

To ensure that the BAYKAL APH 4105X120 performs at its best, it is useful to consider the following formulas:

• Bending Force : F=P⋅b⋅TRF = \frac{P \cdot b \cdot T}{R} $F$ $=$ R P ⋅ b ⋅ T

  • FF $F$ = Force required
  • PP $P$ = Machine power (120 tons)
  • bb $b$ = Width of the material
  • TT $T$ = Material thickness
  • RR $R$ = Bending radius

• Bending Angle : θ=L2⋅(D−T)\theta = \frac{L}{2 \cdot (D - T)} $\theta$ $=$ 2 ⋅ ( D − T ) L

  • θ\theta $\theta$ = Bending angle
  • LL $L$ = Bend length
  • DD $D$ = Distance between punches
  • TT $T$ = Material thickness

Workable Materials

The BAYKAL APH 4105X120 is designed to process a wide range of materials, including:

• Carbon Steel
• Stainless steel
• Aluminum

Maintenance

To ensure long life and optimum performance of your BAYKAL APH 4105X120 , follow these maintenance tips:

• Regular Checks : Perform frequent inspections to identify any signs of wear or damage.
• Lubrication : Make sure all moving parts are well lubricated.
• Cleaning : Keep the machine clean to avoid accumulation of dust and debris that could affect its operation.

Evaluation of a Good Used Car

To determine if the BAYKAL APH 4105X120 is a good choice:

• Hours of Use : Check the number of hours the machine has been used to assess wear.
• General Condition : Carefully examine the general condition of the machine, including tools and safety photocells.
• Documentation : Verify that the machine is sold with all the necessary documentation and certificates of conformity.

Sectors of Use

The BAYKAL APH 4105X120 is used in various industrial sectors, including:

• Metalworking Industry
• Production of Structural Components
• Manufacturing of Metal Parts

Advantages of Buying Used

Buying a BAYKAL APH 4105X120 offers numerous advantages:

• Lower Cost : The price of a used car is significantly lower than a new one.
• Reliability : A well-maintained machine can offer performance comparable to that of a new one.
• Added Value : Included tools and equipment can offer significant added value.

BAYKAL APH 4105X120 hydraulic press brake is an excellent choice for companies seeking a robust, high-performance sheet metal bending machine. With its advanced features and solid construction, it's an excellent option for streamlining production operations.