FT Hydraulic Thermoforming FCS model - Unmissable opportunity for your production system!

If you are looking for an used hydraulic thermoforming that combines advanced technology , reliability and high performance , the FT FCS model represents a unique opportunity in the machines for plastic processing machines . This machine, built in 1995, is still fully functional and has been maintained regularly , ready to be inserted in your production system and satisfy all the forming and cutting needs of plastic sheets.

With a maximum power of 120 kW , a cycle speed up to 35 cpm and a higher and higher heating of 31.2 kW each , this hydraulic thermoforming represents the top of the category for industrial production and assembly lines . It is equipped with 3 forming stations , pitches and stacking system , to ensure continuous and efficient production.

Detailed technical characteristics of the FT FCS thermoform

• Brand : ft
• Model : FCS
• Year of production: 1995
• Forming area : 720 mm x 530 mm
• Maximum cutting size : 730 mm x 500 mm
• Max Lame Traversa : 530 mm
• Min/Max sheet width : 250/780 mm
• Maximum sheet width : 900 mm
• Upper forming depth : 120 mm
• Lower forming depth : 120 mm
• Maximum positive ironing depth : 150 mm
• Maximum mold height : 170 mm
• Maximum dry cycle speed : 35 cpm
• Superior heating : 31.2 kW
• Lower heating : 31.2 kW
• Maximum overall power : 120 kW
• Cutting power : 50,000 Dan
• Motorized coil performance : maximum diameter D.200 mm
• Fully equipped with control unit and void pump
• State : fully functional and operational until April

How the FT FCS thermoform is visually presented

The FT FCS hydraulic thermoform presents itself as an imposing industrial machine, built to manage complex plastic forming in high capacity production environments. The compact and robust design allows you to host the entire production cycle in a relatively reduced space, with a steel structure to guarantee durability and resistance to mechanical stress.

The machine is equipped with 3 forming stations , arranged ergonomically to facilitate the management of the production process. Thanks to the presence of the transcription and the stacking , the machine can not only form but also cut and stack the finished plastic pieces. This versatility allows you to optimize production times and reduce operating costs.

Components and operation of the FT FCS thermoformor

The beating heart of this thermoforming is the advanced hydraulic system that makes it capable of high precision operations. With a cutting power equal to 50,000 Dan , the machine is able to make clear and precise cuts , even on materials of considerable thickness. The presence of 3 forming stations allows continuous production in different processing phases, from the formation to the transcture to the stack , reducing cycle times and increasing efficiency.

upper and lower heating system of 31.2 kW each ensures a homogeneous temperature for the forming of plastic , allowing to work materials such as PVC , Polistirene , Pet and ABS . The void system and the control unit included in the machine guarantee precise control of the suction and forming .

Maintenance and Care of the Machinery

Although the FT FCS model has been maintained regularly , it is always important to follow a preventive maintenance program to ensure optimal operation over time. Some maintenance tips include:

• Control of hydraulic systems : periodically check the pressure of the oil and make sure that there are no losses in hydraulic circuits.
• Lubrication of the mechanical components : each in motion, such as forming stations , must be regularly lubricated to avoid wear.
• Control of heating systems : make sure that electrical resistances work correctly to maintain a constant temperature during the forming cycle.

Safety and Regulations

The FT FCS thermoform is designed to operate safely, but it is essential that it is used following local safety regulations. Always protect the operator with security barriers and protective devices . If there are no CE certifications on the machinery, it is recommended to carry out an assessment of the current safety regulations to make sure that the machine is compliant. It is essential to verify that the hydraulic, electrical and heating system meets all EU directives for industrial machinery.

Sectors of Use and Advantages of Purchasing Used

The FT FCS model is ideal for those operating in the plastic processing . It is widely used in areas such as:

• Packaging industry : for the production of plastic packaging custom -made.
• Automotive sector : for the creation of plastic components.
• Food and cosmetic industry : for the forming of containers and packaging.

Why buy used ? The FT FCS model , despite being a 1995 machine, is still in excellent condition thanks to its regular maintenance . Buying it used allows to obtain a high quality machine at an advantageous price . In addition, used machines like this, if well maintained, are perfectly able to work for many more years.

Conclusions

The purchase of the FT FCS thermoforming represents a unique opportunity to optimize production in plastic processing. With a cutting power of 50,000 Dan , a cycle speed of 35 cpm and a high efficiency heating system , this machine is ideal for those looking for a deal in the sector. Perfect for large volumes and with a ability to work on plastic sheets of different sizes , the FT FCS hydraulic thermal thermal is the right choice to improve productivity without sacrificing quality . Take advantage of the special proposal for € 55,000 and get a fully functional machinery that will continue to serve your company for years to come!