Used Universal M 8T Adhesive PE Labeller, year 1998 - 7000 bph

The rotary adhesive PE labeller is a machine that can apply both adhesive and glue labels. In this specific case, the machine applies the adhesives and therefore each label corresponds to an adhesive station. This allows for the application of a minimum and maximum size that is usually specified by the manufacturer: This applies to both the adhesive station and the rotary adhesive PE labeller.

How it works:

In correspondence with each adhesive station there is always a chute on which the adhesive groups rest, and these are of different types:

In particular, they can have 3 or 5 axes depending on the different inclinations of the labels with respect to the bottle.

The central part of the used adhesive PE labeller is composed of an oil-bath cam through which the varnishes flow. These can be normal or shaped plates or with the notch centered on the bottom. If necessary, they can be replaced by an electronic cam with movements under each plate.

This means, however, that the entire electrical system and machine panel must be rebuilt. Optical centering devices connected to the electronic cam may also be present.

The lower part of the machine contains gears and motors, while the upper part houses the bottle holders (plates). The rotary labeler rotates in phase with the screw conveyor for mechanically feeding the containers. Round and square bottles are inserted correctly into the machine and labeled.

Photocells are present both before and after entering the labeler, which also provide electrical signals to activate the controls.

The operator panel is analog, easy to use, and intuitive, with all functions clearly specified. This type of panel makes the operator comfortable to use, which reduces the risk of problems during production.

Each bottle size has its own dedicated equipment for conveying it to the production line.