Marzorati SCVA6 Linear Actuator priced at €4320 new

Marzorati SCVA6 Linear Actuator - Ball Bearing Rod

General Description

The Marzorati SCVA6 linear actuator is a highly specialized device for linear translation, designed to handle heavy loads and provide precise movements thanks to its recirculating ball bearing system. Used in a wide range of industrial applications, it offers robustness and reliability even in demanding operating conditions.

Components and Construction

• Structure: The structure is made of heavy-duty steel to ensure durability and strength. The recirculating ball bearing shaft reduces friction and improves movement efficiency.
• Ball Screw: The ball screw with 50mm diameter and 20mm lead is designed to convert the rotary motion of the motor into linear motion with high precision.
• Motor: The actuator is equipped with electric motors that provide the power needed for movement. Motors can vary in size and power depending on the load specifications and required speed.
• Reduction System: The actuator uses different reduction ratios to accommodate various speed and load requirements.

Technical Specifications

• Maximum load: 10,000 daN (daN is the unit of measurement of force, which corresponds to decaNewton).
• TP screw: Diameter 50 mm, Pitch 20 mm.
• Reduction Ratio: Available in 1/5, 1/10 and 1/30.

Engine Details

The actuator motor can be configured according to:

• Number of Poles: 4 Poles, 6 Poles, 8 Poles.
• Rotation Speed:
  • 4 Poles: 1400 RPM, 900 RPM, 700 RPM.
  • 6 Poles: 1400 RPM, 900 RPM, 700 RPM.
  • 8 Poles: 1400 RPM, 900 RPM, 700 RPM.

Capacity and Performance

• Dynamic Load:

  • Ratio 1/5: 25,000 N, 50,000 N, 75,000 N.
  • Ratio 1/10: 25,000 N, 50,000 N, 75,000 N, 100,000 N.
  • Ratio 1/30: 25,000 N, 50,000 N, 75,000 N, 100,000 N.

• Engine Size:

  • Ratio 1/5: 112, 132, 160.
  • Ratio 1/10: 100, 112, 132.
  • Ratio 1/30: 80, 90, 100.

• Engine Power:

  • Ratio 1/5: 5.5 kW, 9.2 kW, 15 kW.
  • Ratio 1/10: 2.2 kW, 5.5 kW, 7.5 kW.
  • Ratio 1/30: 0.75 kW, 1.5 kW, 2.2 kW.

• Actuator Power Consumption:

  • Ratio 1/5: 3.5 kW, 7 kW, 10.5 kW.
  • Ratio 1/10: 1.75 kW, 3.5 kW, 5.25 kW.
  • Ratio 1/30: 0.6 kW, 1.2 kW, 1.75 kW.

• Couple Required:

  • 1/5 ratio: 24 Nm, 48 Nm, 72 Nm.
  • Ratio 1/10: 12 Nm, 24 Nm, 36 Nm, 48 Nm.
  • Ratio 1/30: 4 Nm, 8 Nm, 12 Nm, 16 Nm.

• Translation Speed:

  • Ratio 1/5: 93.4 mm/s, 60 mm/s, 46.7 mm/s.
  • Ratio 1/10: 46.7 mm/s, 30 mm/s, 23.4 mm/s.
  • 1/30 ratio: 15.6 mm/s.

Procedure for Use

1. Installation: Mount the Marzorati SCVA6 linear actuator on a stable base. Make sure the ball screw is properly aligned and lubricated.
2. Motor Connection: Connect the motor to the actuator and configure the number of poles and the desired rotation speed.
3. Speed ​​and Load Configuration: Set the gear ratio and motor settings to match the load and speed requirements of your application.
4. Operation Test: Perform a test to verify that the actuator is operating correctly and that the travel speed is within the required specifications.

Matching Accessories

• Lubrication System: To keep the ball screw in optimal condition.
• Speed ​​Controllers: To precisely adjust the travel speed and power consumption.
• Position Sensors: To monitor the exact position of the actuator during operation.

Mathematical Formulas for Optimal Use

• Calculating Translation Speed: Translation speed can be calculated with the formula v=PPassov = \frac{P}{\text{Step}}v=StepP​​, where $v$ is the translation speed, and $P$ is the rotational speed of the motor.
• Calculating the Required Torque: The required torque can be calculated with the formula T=F×d2T = \frac{F \times d}{2}T=2F×d​​, where $T$ is the torque, $F$ is the applied force, and $d$ is the diameter of the screw.

Workable Materials

The Marzorati SCVA6 actuator can be used for a variety of materials depending on the application specifications, including metals, plastics and composites.

Maintenance

• Cleaning: Clean the actuator regularly to remove dust and debris. Ensure the ballscrew is free of contaminants.
• Lubrication: Apply lubricant to the screw and bearings according to the manufacturer's specifications.
• Inspection: Periodically check the wear and condition of the components, replacing any damaged parts.

Used Appraisal

To determine if a used Marzorati SCVA6 actuator is of good quality, consider:

• General Condition: Check for signs of excessive wear or structural damage.
• Functionality: Test the actuator operation to ensure it meets speed and load specifications.
• Documentation: Check the availability of technical documentation and maintenance manuals.

Sectors of Use

The Tollook TLK 60X90 locking assembly is used in various sectors, including:

• Industrial Automation: For precise positioning and control of equipment and machines.
• Manufacturing: Used for linear motion in manufacturing processes.
• Workshops and Maintenance: Ideal for assembling and adjusting components in repair environments.

Advantages of Buying Used

Buying a used Marzorati SCVA6 actuator offers numerous advantages:

• Lower Cost: More competitively priced than a new component.
• Reliability: Used components from recognized brands such as Marzorati often demonstrate long life and reliable performance.
• Availability: Easier to find than new components, with immediate availability.