Make: Haas
Model: VF-6B / 40 HE
Serial number: 31759
Control: Haas
Year of construction: 05/2003

TABLE
Table dimensions: 1626 x 711 mm
Number of standard T-slots: 5
T-slot width: 15.90 to 16 mm
T-slot center distance: 125 mm
Maximum weight on table: 1814 kg

TRAVELS
X-axis travel: 1626 mm
Y-axis travel: 813 mm
Z-axis travel: 762 mm
Min. from spindle tip to table: 102 mm
Max. from spindle tip to table: 864 mm

SPINDLE
Max. power Rated Power: 22.4 kW
Maximum Speed: 8100 rpm
Maximum Torque: 122 Nm - 2000 rpm
Maximum Torque with Optional Range Shift: 339 Nm - 450 rpm
Drive System: Inline Direct-Drive
Taper: CT or BT 40
Bearing Lubrication: Air / Oil Injection
Cooling: Liquid Cooled

ELECTRICAL SPECIFICATIONS
Spindle Speed: 8100 rpm
Drive System: Inline Direct-Drive
Spindle Power: 22.4 kW
AC Input Voltage (3 Phase) - Low: 220 VAC
Full Load Amps (3 Phase) - Low: 70 A
Input AC Voltage (3 Phase) - High: 440 VAC
Full Load Amps (3 Phase) - High: 35 A

FEED RATES
Maximum Cut: 12.7 m/min.
Rapid Feeds on X-Axis: 15.2 m/min.
Rapid traverse on the y-axis: 15.2 m/min.
Rapid traverse on the z-axis: 1.2 m/min.

AXIS MOTORS
Maximum thrust x-axis: 15124 N
Maximum thrust y-axis: 15124 N
Maximum thrust z-axis: 24910 N

AIR REQUIREMENT
Air required: 113 l/min. - 6.9 bar
In-line pneumatic hose: 3/8 in
Coupling (for air) 3/8 in
Minimum air pressure: 5.5 bar
AXIS MOTORS
Maximum thrust x-axis: 15124 N
Maximum thrust y-axis: 15124 N
Maximum thrust z-axis: 24910 N

AIR REQUIREMENT
Air required: 113 l/min. - 6.9 bar
Inline pneumatic sleeve: 3/8 in
Coupling (for air) 3/8 in
Minimum air pressure: 5.5 bar
AXIS MOTORS
Maximum thrust x-axis: 15124 N
Maximum thrust y-axis: 15124 N
Maximum thrust z-axis: 24910 N

AIR REQUIREMENT
Air required: 113 l/min. - 6.9 bar
Inline pneumatic sleeve: 3/8 in
Coupling (for air) 3/8 in
Minimum air pressure: 5.5 bar