The 9D718 balancing machines are suitable for balancing rotors weighing 30 to 3000 kg. Equipped with a reinforced construction and a powerful electrical entry system, these machines are suitable for easily manipulating the biggest pieces. The Moyenne 9D718 series is highly sought after for its versatility, and is actually the favorite of a great number of industries, including metallurgy, gas and petrochemistry, energy and machine construction. C'est le choix qui lorsque la précision est essentielle.

Ideal for high precision balancing, the 9D718 is suitable for parfaitement with the rotors of electric motors, pumps, compressors, blowers, screw bottles, gearboxes and even energy production turbines. If you are looking for a suitable tool for high performance or high precision work, the 9D718 is for you.

• High precision balancing 0.4 gmm/kg = 0.4 µm
• Enable the balancing process at the same time and monitor the de-balancing behavior of the rotor on the crank to achieve the best possible result.
• The special design of the wheels, here are assembled with precision wheels.
• The monolithic design of the supports and the base avoids the vibrations due to the balance in reducing the number of vibrations of the "oscillation system".
• It allows you to measure important initial imbalances without destroying the machine, as well as correcting rotor imbalances directly on the machine.
• The low natural resonance frequency of the supports allows you to balance the rotor with low rotation screws.
• The large size of the support wheels and the wheel block allows the installation of the rotors with the three-court wheel tourillons.
• The head of the wheel block is adjustable, which allows you to balance the rotors without the tourillons on different diameters and to center the rotors of the installation of the machine.
• The entrance to a long course of tension here allows, with only two entrance corridors, to make the tour no matter what rotor.
• The acceleration and deceleration of the electric motor are ensured by the frequency variator.

• Axial entry, here use a cardan shaft. Used for pieces presenting a high aerodynamic style or special conception characteristics (for example, as seen above).
• Combined entry - axial entry and side entry on one chassis. This machine is required for business using rotors of different conceptions.
• Lit de machine allongé. The base of the machine can be adapted to the length of the rotor.
• The rotor screws allow for quick and shock-free installation of the rotor to ensure the safety of the contact surfaces of the rotor and the machine's wheels.

• Weight range of balanced rotors: 130-3000 kg
• Maximum diameter of the rotor: 2000 mm
• Distance between the centers of the rotor supports: 470 - 3000 mm