Detailed Technical Data Sheet: Centrifuge Used for Small Metal Parts

Overview

The centrifuge used for small metal parts is an essential machine for cleaning and finishing small metal components. This 380V machine is equipped with a mesh basket and has a diameter of approximately 80 cm. The centrifuge for small metal parts is designed to remove debris and improve the surface finish of machined parts, providing effective cleaning through centrifugal force.

Components and Construction

The centrifuge used for small metal parts is composed of the following main components:

• Brand : Not specified, but can be from various manufacturers.
• Model : Generic for small metal parts, powered by 380V.
• Mesh Basket : Made of durable metal, designed to hold and separate small metal parts during the spinning process.
• Motor : Powered by 380V, responsible for rotating the basket and generating centrifugal force.
• Structure : Made of steel or heavy duty material to ensure durability and stability.

Dimensions and Mechanical Characteristics

• Basket Diameter : Approx. 80 cm.
• Rotation Speed : Varies depending on model and application, typically between 500 and 1500 rpm.
• Load Capacity : Depends on basket size and motor power; generally designed to handle moderate amounts of small metal parts.

Procedure for Use

1. Preparation : Make sure the juicer is properly connected to the power supply and that the mesh basket is fitted and secure.
2. Loading : Place small metal parts in the mesh basket. Avoid overloading the basket to avoid compromising performance.
3. Setting : Adjust the rotation speed to suit your specific cleaning and finishing needs.
4. Start : Turn on the machine and let the spin cycle run until the end of the set cycle.
5. Draining : At the end of the cycle, open the machine and remove the cleaned metal parts.

Matching Accessories

Accessories that can be combined with the centrifuge used for small metal parts include:

• Baskets of Various Sizes : To accommodate various types and sizes of small metal parts.
• Cleaning Materials : For example, plastic or ceramic balls to improve cleaning effectiveness.
• Filters and Sieves : To separate debris and facilitate maintenance.

Mathematical Formulas for Optimal Use

To optimize the use of the centrifuge used for small metal parts , consider the following formulas:

1. Centrifugal Force (F):

   $$F$$

   Where:

   • mm $m$ is the mass of the material (kg).
   • rr $r$ is the radius of the basket (m).
   • ω\omega $\omega$ is the angular velocity (rad/s), calculated as 2πn60\frac{2\pi n}{60} 60 2 πn ​, nn $n$ is the velocity in rpm.

2. Cycle Time (T):

   $$T$$

   Where:

   • VV $V$ is the volume to be treated (m³).
   • FF $F$ is the applied force.
   • kk $k$ is a process efficiency coefficient.

Workable Materials

The metal parts centrifuge is designed to work with a variety of metal materials, including:

• Steel : For industrial and mechanical components.
• Aluminum : For lightweight, precision parts.
• Brass and Copper : For high quality small parts and specific applications.

Maintenance

To ensure a long life and optimal functioning of your used centrifuge for small metal parts , follow these tips:

• Lubrication : Check and renew the oil or grease in the engine and bearings regularly.
• Cleaning : Remove any small metal residue and clean the drum and inside of the machine after each use.
• Inspection : Periodically check the condition of the drum and components for signs of wear or damage.

Used Appraisal

To make sure your used small metal parts centrifuge is a good buy:

• Check Condition : Examine the machine for any signs of wear and damage.
• Test Operation : Test the machine to make sure it is working properly and that there are no abnormal vibrations or noises.
• Request Documentation : Make sure you have documentation regarding maintenance and any repairs.

Sectors of Use

The centrifuge used for small metal parts is used in various industrial sectors, including:

• Metalworking Industry : For cleaning and finishing small metal components.
• Automotive Sector : For the machining of small parts and engine parts.
• Aerospace Industry : For high precision and quality components.

Advantages of Buying Used

Buying a used centrifuge for small metal parts can be advantageous for several reasons:

• Lower Cost : Used juicers are generally cheaper than new models.
• Immediate Availability : You can start using the machine right away without having to wait for the delivery times of a new purchase.
• Value : If properly maintained, a used juicer can offer similar performance to a new one at a significantly reduced cost.

If you have any other questions or need more details, I'm here to help!

PRICE ON REQUEST.