Felder Bordonator mod. G580 used with adjustment and rounded Technical Data: Bord thickness (mm) 0.4–5.0 Height Piece (mm) 8–50 Width min. of the piece (mm) 70 The minimum width of the piece varies with the length, height and surface finish of the piece length min. of the piece (mm) 140 groups: -chain advancement with 9 m /min advancement speed and rubberized support bearings for an optimal seal on the processing piece -extra -450 mm removable work of extractable work. -facilitates work with large pieces -continuous advancement of the edges on support plate, Ø 720 mm, for pvc/ABS settled edges -on board on pvc/ABS rails of 0.4-3 mm thick, single insertion of edges in strips up to 5 mm -guillotine -axoia for borders in ABS/PVC rolls up to 3 up to 3 MM -Junction with diamond cutters controlled by the application and 2 independent engines, each with 0.75 kW, 12,000 rpm, manually adjustable chip removal from 0 to 2 mm, including 2 diamond cutters (Ø 70 mm, H 54 mm, Z 2 2) -Vasca coated with Teflon with a capacity of 1.5 kg, with roller and monitoring immersion heater (~ 250lfm for 1kg of granulate on a 19mm panel) -unit of mechanical pressure, 1 roller d. 110 and 2 rollers d. 50; adjustment via sensor for the thickness of edges -range with 1 engine of 0.55 kW, 12,000 g/m -multifunction refurbished refurbier, 12,000 g/min, 2x 0.55 kW, flush milling, blended and radius, for thick and thin edges, adjustment via sensor for the thickness of edges -1 engine rounder for post and softforming up to 50 mm groups Finish: -Srase, manual exclusion, mechanical adjustment for r = 2 mm -Srascholla -Pozzole with 2 engines of manufacture 2013