Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Used Uniloy Milacron HSM10/D extrusion blow molding machine designed for the production of HDPE containers up to 10 L. Featuring a single parison head and a robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water cans, edible oils) and can be integrated into a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications and Performance Data Key Data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of Cavities: 1 Maximum Container Volume: 10 L Approximate Production Rate: Up to approx. 300 bph on 10 L (depending on application) Manuals: Included Product Code: SO126 Extruder Screw Diameter: 100 mm; L/D 24 Screw Speed ​​in HDPE: 0–70 rpm Plasticizing Capacity (HDPE): Approx. 300 kg/h Main Extruder Motor: 89 kW Heating Zones: 6; Drum Heating Power: 31.4 kW Motor Cooling Power: 0.58 kW; Drum cooling power: 1 kW Parison head Type: PE 1/200, single parison Maximum die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall thickness programming) Clamping and blowing unit Clamping force: 200 kN Maximum mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Power supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulics Tank capacity: 400 l Pump capacity (1470 rpm): 123 l/min Maximum pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air consumption: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air consumption: 1000–1500 Nl/min Cooling water Mold circuit: 8–12 °C; Flow rate 15 m³/h Extruder and hydraulic oil: 10–24 °C; Flow rate 4 m³/h Dimensions and weights Approximate machine dimensions (L × W × H): 7600 × 7700 × 3900 mm Weight of blow molding unit: 7600 kg; Extrusion unit weight: 6400 kg Operator noise level: < 85 dB(A) Advanced automation and control systems Hydraulic wall thickness programming for precise parison control, improving weight distribution and top-loading performance on 10 L containers. Dedicated Uniloy command and control software (version code available in the manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control in six extruder zones and a heated head for stable processing at a processing temperature of up to 300 °C. Interlocked protection and emergency stops for safe operation. Production line integration capability This pre-owned extrusion blow molding machine is ready for integration with downstream equipment typical of a used bottling line and industrial packaging system: Conveyors, deburring/trimming, leak testers, vision/weighing checks, and palletizing cells. Standard Utilities: 400V/50Hz electric, 6-8 bar compressed air, closed-loop cooling water at specified flows. Suitable for beverage production auxiliaries such as water and edible oil cans, as well as chemicals and household products. Machine Condition and Maintenance History: Condition: Used unit with original documentation; commissioning and maintenance manuals are available. Chiller: Not supplied (hydraulic circuits as per specifications are required). Air Compressor: Not included unless otherwise specified. Inspection and testing under product and equipment is recommended to validate cycle time and wall thickness distribution. Operational Performance and Versatility: Single-parity design supports consistent production of 5-10L containers with interchangeable dies up to Ø200mm. Processing HDPE at high plasticizing capacity (~300 kg/h) enables competitive cycle times of approximately 300 bph on 10 L, depending on mold design, cooling, and part geometry. Stable temperature control and hydraulic parison programming provide repeatable quality for the most demanding industrial packaging requirements. Installation and Site Preparation Requirements: Footprint and Access: Allocate at least 7.6 × 7.7 m plus free space from service; Minimum height 3.9 m. Electrical: 400 V, 50 Hz, 3+N, 318 A; Installed power 156 kW (typical average ~104 kW). Compressed Air: 6–8 bar; 2000–2500 Nl/min for the process plus 1000–1500 Nl/min for post-cooling. Cooling Water: Mold circuit 8–12 °C at 15 m³/h; Extruder/oil circuit 10–24 °C at 4 m³/h. Provide adequate water filtration and treatment. Floor load: Allow a total machine mass of approximately 14 t between the extrusion and blow molding groups. Safety standards and compliance certification: Safety features include interlocking guards, emergency stop circuits, and noise emissions of less than 85 dB(A) at the operator's location. Built according to European safety practices of its time of manufacture. Compliance with applicable local regulations must be verified during installation. Comprehensive manuals support risk assessments, CE validation updates, and operator training.