SCM 520 E Thicknesser

The SCM 520 E Thicknesser , a used machine in practically new condition, represents excellence in the field of woodworking. Built in 2006, this machine is a paragon of quality and reliability, suitable for those seeking high performance with a machine that has retained its technical characteristics intact over time.

Visual Description and Construction

The SCM 520 E features a robust and functional design, typical of SCM's high-end machines. The body of the planer is made of cast iron, ensuring stability and reducing vibration during use. The finish is solid and free from signs of wear and corrosion, a testament to the machine's meticulous maintenance.

• Overall Dimensions:
  • Total length of the shelves: approximately 1,200 mm.
  • Effective working width: 520 mm.
  • Maximum working height: 220 mm.
  • Machine weight: approximately 500 kg.

The machine features a large worktable, which contributes to stability and precision. The worktables have an excellent finish, and the surface has been designed to allow the wood to pass through easily without jamming.

Components and Technical Characteristics

• Motor:

  • Power: 5.5 kW (7.5 HP).
  • Power supply: 400 V, three-phase.
  • Motor type: Induction with star-delta start to ensure smooth starting and long life.

• Electronic Viewer:

  • Equipped with an electronic thickness display, which allows you to precisely monitor the working height, ensuring accurate setting of the material thickness.

• Tree and Knives:

  • Shaft diameter: 90 mm.
  • Number of knives: 3.
  • Knives dimensions: 520 x 30 x 3 mm.
  • Rotation speed: 4,500 rpm.
  • Maximum removal: 4 mm per pass.

• Work Plan:

  • Worktop dimensions: 520 x 1,200 mm.
  • Maximum working height: 220 mm.
  • The top is height-adjustable via an electric movement system, which allows you to precisely set the desired thickness.

Usage Procedure

1. Machine Preparation:

   • Check that the machine is correctly connected to the three-phase electrical network.
   • Check the lubrication level and the correct functioning of the electronic thickness display.

2. Job Setup:

   • Use the electronic display to set the desired working height.
   • Adjust the work surface to fit the size of the material.

3. Planing Operation:

   • Place the wood on the machine and make sure it is well supported.
   • Start the engine and adjust the feed speed according to the needs of the job.
   • Carry out the planing, constantly monitoring the result via the viewer.

Matching accessories

The SCM 520 E can be accessorised with various additional tools:

• Guides and Supports: to improve cutting and planing precision.
• Support Rollers: to facilitate the loading and unloading of material along the machine.
• Replacement Knives: to keep your machine in perfect working condition.

Formulas and Parameters of Optimal Use

To ensure the best results when working with wood, it is important to consider:

• Maximum removal: Do not exceed 4 mm per pass to avoid excessive stress on the motor and knives.
• Feed Speed: Adjust the feed speed of the material based on the density and type of wood. The higher the resin content, the slower the speed should be.

Workable Materials

The SCM 520 E is designed to work a wide range of woods:

• Solid wood.
• Plywood and MDF panels.
• Hard and soft woods, with varying degrees of density.

Maintenance

To keep your SCM 520 E in top condition:

• Regular Cleaning: Remove wood chips and debris after each use.
• Lubrication: Check and lubricate moving parts periodically.
• Checking the Knives: Make sure the knives are sharp and replace them if necessary.

Evaluation of Good Used

When purchasing a SCM 520 E , it is essential:

• Check the general condition of the machine and for signs of wear or damage.
• Check the operation of the electronic display and electrical components.
• Request a test run to ensure all parts are working properly.

Sectors of Use

The SCM 520 E is ideal for:

• Carpentry workshops: for the production of precisely machined wooden pieces.
• Furniture workshops: for planing and preparing furniture components.
• Wood industry: for applications requiring high precision and finishing quality.

Why It's Better to Buy Used

Buying a SCM 520 E can offer significant advantages:

• Low Cost: A cheaper option than buying a new car.
• Reliable Performance: High-quality machines like the SCM 520 E have a long life and can deliver excellent performance even when used.
• Resale Value: Well-maintained machines can retain a good resale value.

In conclusion, the SCM 520 E Thicknesser , despite being used, represents an excellent option for those seeking quality and precision in woodworking. With its electronic display and advanced features, it's a reliable choice with excellent performance.