MACC SPECIAL 320 M manual band saw NEW READY FOR DELIVERY!!! “CE” warranty Made in Italy Cutting capacity: 0° = round tubular 230 mm – square 220 mm – rectangular 170 x 300 mm 45° = round tubular 200 mm – square 180 mm – rectangular 180 x 230 mm 60° = round tubular 130 mm – square 120 mm – rectangular 110 x 130 mm Vertical rotation on pin with adjustable backlash-free tapered bearings. Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Suitably sized flywheels. Robust band guides made with sealed lead-in bearings and adjustable widia plates. Band tension obtained via an electromechanical device with blade rotation microswitch control. Vice with quick locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1.2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V Electric pump 0.06 kW for band cooling The fundamental characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides and band tensioning) have been the subject of careful study to avoid band yielding, increase its duration, improve linearity and cutting time